You'll find a wide selection of gas fitters wellington fittings at the supermarket, but it's not always easy to find the right product for your car, especially if you are looking for something specific. Here is where you can find helpful information about gas fittings and what you might need to know to make the right choice for your vehicle.
The Basics
Firstly, you will need to determine what type of fuel system you have in your car. This will influence the kind of gas fittings you need. Here are the most common types of fuel systems in use:
- PETROL
- DIESEL
- LPG
- CNG
- Hybrid
- Electric
- Cordless
Since you're reading this article, I assume you already know what type of fuel system you have in your car. If not, check out this article:
How To Identify Your Car's Fuel System
, for more information.
Gas Fittings
Once you know what type of fuel system you have in your car, it's time to look at the various gas fittings available. These are the actual connections used to attach your fuel pump to your car's tank. The gas fittings you need will depend on how your fuel system is connected to your tank. Here are the most common types of gas fittings:
- Nipple - to - cup
- Mud-plug
- Flexible plastic
- Steel
- Red brass
- Screw (male)
- Tee (female)
- Stainless steel
- Fully coated steel
- Plastic
- Closed-ended
- Flared
- Pipe wainer
- Pipe threader
- Elastic (O.D.)
- Stainless steel
- Brass
- Closed-ended
As you can see, there are many different types of gas fittings to choose from. It's a good idea to visit your local garage to have a look at the types of gas fittings they use, as this will help you find the right fit for your vehicle.
Inspect The Tank
Before you buy any gas fittings, it is a must that you inspect the tank they come with. In particular, make sure it is fitted with a secure and leak-proof seal. Also, look for any chips, cracks, or rust on the tank's exterior. This can make leaks possible, so it is important to know the condition of the tank before you connect it to your car's fuel pump.
Common Mistakes
When ordering gas fittings online, it is important to be aware of some common mistakes that people make, which cause them to buy the wrong products. If you keep an eye out for these items, you will be able to avoid making these mistakes, and instead order the right products for your car.
- Not checking the delivery address before you order
- Receiving the wrong product
- Buying the cheapest product that looks OK
- Not using the correct connection size
- Buying a gas can that is too big
- Buying a gas tank that is too small
- Ignoring the instruction manual provided by the manufacturer
- Trying to use a gas fitting that is too big for the tank it is designed for
Fuel Delivery System
The type of fuel delivery system you have in your car will also influence the kind of gas fittings you need. If you have a gravity-feed fuel system, you will only need flexible plastic gas fittings. If you have a pump-feed fuel system, you will need to order steel, or thick-walled plastic gas fittings. If you are using ultra-conscience fuel (such as E85 or vegetable oil), then you will need to get flexible plastic tank-to-fittings, or stainless steel connections.
Installation
Another important factor to consider when buying gas fittings is how you plan to install them in your car. Some people like to go the easy way and just use existing fuel line fittings, while others prefer to cut holes in their existing fuel tank to thread the gas fittings through.
In most cases, existing fuel line fittings can be used as is, and all you will need to do is remove the old ones and replace them with new ones. However, if you are going to use new fuel line fittings, you will need to cut holes in your existing fuel tank to thread them in. Be sure to have the proper tools for this job before you begin, otherwise it will be very difficult. Also, make sure you test the quality of the new fuel line before you use it. If the line is of good quality, it will be easy to cut and fit, and will not require any special tools.
Safety
Gas fittings are considered to be a part of the vehicle's electrical system, and therefore they are vulnerable to damage from static electricity, or high-voltage electricity from car accidents or lightning strikes. For this reason, it is also important to ensure that your gas fittings can withstand high pressures and temperature variations without any risk of leaking or breaking.
To meet these safety standards, gas fitting manufacturers try to use materials that are more resistant to heat and pressure. For instance, seamless steel is often preferred over ordinary steel, because it is more heat and pressure-resistant. In addition, a lot of gas fittings are now designed to be leak-proof, which makes them more suitable for extreme conditions. For example, some plastic gas fittings are fully welded, which is an extra step that further increases the fitting's ability to withstand extreme conditions. The bottom line is, the better the gas fitting, the safer it is for you and your family.
Final Takeaway
When choosing gas fittings for your car, it is important to consider many factors, including the type of fuel system you have, the quantity you need, and whether you want a stainless steel or plastic gas fitting. In most cases, you will only need to look for one type of gas fitting that meets your needs, and this will make your decision easier. With this article, you should now be better-equipped to find the right gas fittings for your vehicle.